CP Grade 4 Titanium
CP (Commercially Pure) Grade 4 is unalloyed titanium providing reasonably high mechanical strength (typical yield strength 559 MPa) combined with good weldability. Compared with CP Grades 2 and 3 the Grade 4 possesses lower toughness despite its higher strength. Grade 4 titanium has a density of 4.54 g/cc - less than 60% that of steel.
CP Grade 4 is used in a diverse range of industrial applications. The material offers good weldability.
This material offers high corrosion resistance in oxidising, neutral and mildly reducing media, including chlorides. The higher level of oxygen in this CP grade increases the susceptibility to stress corrosion cracking.
Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical topic. Smiths Metal Centres Limited also boasts an in-house UKAS Accredited Testing Laboratory
which is unique within the multi-metal and plastic stockholding sector. We believe this underlines our total commitment to quality and our ethos of being the complete service provider.
- Architectural components
- Automotive components
- General engineering
- Chemical and Oil & Gas applications
We offer CP Grade 4 titanium in bar, wire, strip, sheet, plate, seamless and welded pipe. We offer processing options throughout the Group with over thirty power saws available to cut your material to size. It is just as economical for us to cut a single one off blank to large production runs.
Pick a Product
To find out more about Smiths Metal Centres extensive range of high quality titanium & titanium alloys, click on one of our products on the side menu of this web page.